Description
M6 Cheese Mould will turn out a 4k hard cheese using approximately 32ltrs of milk. The M7 follower, product code 0073, is sold separately.
All our cheese making moulds are made from Food Standard Certificate (FSC) durable plastic. Looked after, will last for many, many years. Measurements are in millimetres:- top diameter x bottom diameter x height.
M6 cheese mould is dishwasher friendly.
Included in the description is a recommendation for use, soft, semi-soft, hard, semi-hard or suitable for soft and hard.
Soft moulds are usually taller than they are wide. The curds will shrink down during the cheese making process, by as much as two-thirds. So really pack the curds in, once the mould has been lined with cheesecloth. Soft cheese moulds have holes in the sides and base to enable the whey can drain freely. Coming in various shapes and sizes, including beaker, cylindrical, square, conical, pyramid, heart shaped and basket. If the mould you have chosen doesn’t have a base, remember to sit the curd filled mould on a drainage mat.
Hard moulds traditionally have a follower. This sits on top of the curds in the mould, lined again with cheesecloth, before placing in the cheese press. Pressure is applied to the follower, in turn pressing down on the curds. The whey then drains away.
Applying the correct pressure is crucial. So make sure you follow the recommendations according to the recipe.
200 x 200 x 150mm cheese mould with base.
Justin Young –
Have a couple of these moulds and good all round robust mould useful for a number of cheeses (e.g. Stilton, Brie, Hard Cheese, etc).